Tips of Transparent HD Glossy Silicone Printing

Transparent High density glossy silicone ink printing tips:

Preparation:

Mesh&Squeegee: 120(48T) Mesh number ;65-75 degree Squeegee.

Pigments added ratio:For white and fluorescent color 20%,other color 10%

Catalyst mixing ratio:2% slow dry XG-866B-1 and fast dry XG-866B-2 can mix together for using.

Thinner XG-128A adding ratio:0-10%    thinner is not  necessary  glossy top coating printing

Heating Temp and time: Flash cure temp :100℃- 120℃ for 6-10 seconds ,Drying temp :120℃- 140℃ for about 2 -5 minutes.

Printing process :

1st: Round silicone ink print for 6-8 times

Round silicone  XG-866A-2Y/XG-866A-LK-1   50G

Fast dry catalyst              XG-866B-2      1G  2%

Flash temp: 120 degree.

2nd: Glossy silicone for top coating printing for 1-2 times

Glossy silicone XG-399-3     60G

Fast dry catalyst XG-866B-2   1.2G 2%

Flash temp: 120 degree

Tips for round glossy silicone top coating printing :

A. The angel between squeegee & table 60-70 degree,if manual printing about 45-65 degree

B. Keep distance between printing squeegee & screen

C. Gently & slowly  print ,try to get more ink pass through the mesh to get round glossy effect.

3rd After finish printing to heat by 120-140 degree for 2-3 minutes

[video_embed url=”http://www.youtube.com/watch?v=-9af7XdIU-g”] [space_box id=”” height=”10″]

[video_embed url=”http://www.youtube.com/watch?v=eFqPh0v-96Q”] [space_box id=”” height=”10″]