TDS of XG transfer silicone 20AH for HD label

Preparations :

Silicone ink PET films:

Matte film

Screen Mesh number： 120-200 (48-80T) , Mesh(screen film )thickness 0.1-0.2MM,it is depends on printing Artworks.

Squeegee：65-80 degree .

Printing tips:

1 Transfer silicone color layer printing for 4-8 +layers  :

Transfer HD silicone     XG-20ＡＨ        100G

Pigments Red           XG-302            10G    10%

Silicone catalyst         XG-TMB-1          10G     10%

Silicone thinner         XG-128AH          10-20G    10-20%

Flash by 80 to100 degree

2 Transfer crossing linker 2 layers :   

Silicone crossing linker        XG-360Z-3X       50G

Crossing linker agent         XG-866B-2+       3-4G    6-8%

Flash 100-120 degree.

3 Hot melt glue XG-360R-2 or XG-360R-3 print for 6-8 layers.

To mix 5-10% cyclohexanone to liquid the glue,if glue to be thick and choke the mesh screen.  If print glue first need to print 2 times glue more than print silicone ink first.

Flash by room temp or by 80-100 degree.

4 After finish to bake in the oven by 100 degree for 30 minutes .

5 Heat press the sticker on the heat transfer press machine by the temp of 160-170 degree for 12-18 seconds under pressure of 4KG.

TIPS:Kindly doing test before productions every time.

If any questions kindly contact with Belinda +86 18319607489 whatsapp & wechat the same number.