TDS of transfer silicone XG-360W-2 printing
Silicone ink PET films:
Two types: one is glossy coating film which will be glossy after heating press on fabric, another one is matte finish effect after heating press on fabric.
Mesh number： 120-200, Mesh (screen film) thickness 0.1-0.2MM, it depends on printing Artworks.
Squeegee：65-80 degree.
Printing tips:
- For transfer silicone printing we have two types of transfer silicone, one is XG-360W-2, catalyst 360B mixing ratio 10% flash by temp 100 degree, another one is XG-866A-2Y, catalyst XG-866B-2 mixing ratio 2-3% flash by temp 200 degree:
A 1st solution, color transfer silicone layer print 4 + layers:
Transfer silicone XG-360W-2 100G
Silicone Pigments 10-20G (10-20% white&fluorescent 15-20% other colors 10%)
Silicone catalyst XG-360B-2 10G 10%
Silicone thinner XG-128AH 10-20G 10-20%
Flash by 100 degree. If need high density then print more layers
B 2nd solution, color transfer silicone layer print 4 + layers
Transfer silicone XG-866A-2Y 100G
Silicone Pigments 10-20G (10-20% white&fluorescent 15-20% other colors 10%)
Silicone catalyst XG-866B-2 2-3G 2-3%
Silicone thinner XG-128AH 10-20G 10-20%
Flash by 120 degree. If need high density then print more layers
- Crossing linker print for 2 layers:
Crossing linker XG-360Z-3X 50G
Crossing linker catalyst XG-866B-2 2.5 G 5%
Flash by 100 degree.
- Hot melt glue XG-360R-2 print for 4-6 layers.
To use cyclohexanone to liquid the glue, mixing ratio 10%, if glue to be thick and choke the mesh screen Flash by room temp or by 80-100 degree.
- After finish, put into the oven to bake by 100 degree for 30 minutes.
- Heat press the sticker on the heat transfer press machine by the temp of 160-170 degree for 10-16 seconds under pressure of 4KG.
TIPS:Kindly doing test before productions every time.
If any questions kindly contact with Belinda +86 18319607489 whatsapp&wechat the same number.
