Silicone Transfer by Glue

silicone transfer stickers by glue

Silicone ink PET films:

Two types : one is glossy coating film which will be glossy after heating press on fabric ,another one is matte finish effect after heating press on fabric.

Mesh number： 120-200 , Mesh(screen film )thickness 0.1-0.2MM,it is depends on printing Artworks.

Squeegee：65-80 degree .

Printing tips:

1 Silicone ink color layer printing for 3-4 layers

Silicone ink     XG-866A-2Y       100G

Pigments or special powders       10-20G  (10-20% white&fluorescent 15-20% other colors 10%)

 Catalyst     XG-866B-2           2G   2%

Thinner         XG-128AH          10-20G    10-20%

Flash by 100 to120 degree.

2 Silicone ink clear layer printing 2 -4 layers if needed for high density stickers,if need more high density then print more times clear.

  Silicone ink     XG-866A-2Y       100G

  Catalyst     XG-866B-2           2G   2%

Thinner         XG-128AH          10-20G    10-20%

Flash by 100 to120 degree.

3 Mid layer crossing linker printing for 2 times:

Crossing linker      XG-360Z-2     50G

 Crossing linker agent  XG-360ZB      3G   6%

Flash by 100 to120 degree.

4 Hot melt glue XG-360R-3 print for 4 layers. To use cyclohexanone to liquid the glue,mixing ratio 10%.This type of glue easy to be thick and mesh clogging ,so if feel thick and hand to print then can mix with some cyclohexanone to liquid it and get easy printing.
Flash by room temp or by 80-100 degree.

5. After finish, put into the oven to bake by 100 degree for30- 40 minutes .

6. Press the stick on the heat transfer press machine by the temp of 160-170 degree for 10-16 seconds with pressure of 4KG.

If any questions kindly contact by Cell:+86 18319607489 wechat&whatsapp the same number