How to Use HD transfer silicone ink printing?
Silicone ink PET films:
Two types : one is glossy coating film which will be glossy after heating press on fabric ,another one is matte finish effect after heating press on fabric.
Mesh number: 120-200 , Mesh(screen film )thickness 0.1-0.2MM,it is depends on printing Artworks. Squeegee:65-80 degree .
Printing tips:
- 1. Transfer silicone color layer printing for 3-8 layers :
Transfer silicone XG-866A-3Y 100G
Pigments or special powders 10-20G (10-20% white&fluorescent 15-20% other colors 10%)
Silicone catalyst XG-866B-2 3G 3%
Silicone thinner XG-128AH 10-20G 10-20%
Flash by 100 to120 degree. For the last color layer keep wet no need to heat.
- 2. Transfer Silicone ink mix with transfer agent for mid layer printing for 2 layers :
Transfer silicone XG-866A-3Y 50G
Silicone thinner XG-128AH 10-20G 10-20%
Silicone catalyst XG-866B-2 1.5G 3%
Silicone transfer agent XG-MZ 2.5G 5%
No need to heat, wet on wet print two layers on wet red transfer silicone ink layer.
- 3. Hot melt glue XG-360R-2 print for 4-6 layers.
To use cyclohexanone to liquid the glue,mixing ratio 10%,if glue to be thick and choke the mesh screen Flash by room temp or by 80-100 degree.
- 4. After finish, put into the oven to bake by 100 degree for 30 minutes .
- 5. Heat press the sticker on the heat transfer press machine by the temp of 160-170 degree for 10-16 seconds under pressure of 4KG.
TIPS:Kindly doing test before productions every time.
Silicone ink PET films:
Two types : one is glossy coating film which will be glossy after heating press on fabric ,another one is matte finish effect after heating press on fabric.
Mesh number: 120-200 , Mesh(screen film )thickness 0.1-0.2MM,it is depends on printing Artworks. Squeegee:65-80 degree .
Printing tips:
- 1. Transfer silicone color layer printing for 3-8 layers :
Transfer silicone XG-866A-3Y 100G
Pigments or special powders 10-20G (10-20% white&fluorescent 15-20% other colors 10%)
Silicone catalyst XG-866B-2 3G 3%
Silicone thinner XG-128AH 10-20G 10-20%
Flash by 100 to120 degree. For the last color layer keep wet no need to heat.
- 2. Transfer Silicone ink mix with transfer agent for mid layer printing for 2 layers :
Transfer silicone XG-866A-3Y 50G
Silicone thinner XG-128AH 10-20G 10-20%
Silicone catalyst XG-866B-2 1.5G 3%
Silicone transfer agent XG-MZ 2.5G 5%
No need to heat, wet on wet print two layers on wet red transfer silicone ink layer.
- 3. Hot melt glue XG-360R-2 print for 4-6 layers.
To use cyclohexanone to liquid the glue,mixing ratio 10%,if glue to be thick and choke the mesh screen Flash by room temp or by 80-100 degree.
- 4. After finish, put into the oven to bake by 100 degree for 30 minutes .
- 5. Heat press the sticker on the heat transfer press machine by the temp of 160-170 degree for 10-16 seconds under pressure of 4KG.
TIPS:Kindly doing test before productions every time.

