How to print silicone ink upper on Knitting Shoes?

TDS of Silicone Ink for knitting Shoe upper printing

How to print silicone ink upper on Knitting Shoes?

TDS of Silicone Ink for knitting Shoe upper printing

Preparation:

1.Mesh&Squeegee: 80 (32T) &120(48T) Mesh number ;65-75 degree Squeegee.
2.: Pigments added ratio:For white and fluorescent color 20%,other color 10%
3.Catalyst mixing ratio:
Silicone ink to mix with 2% XG-866B-2
Crossing linker mix with 6% XG-866B-2+ ,if XG-866B-2 10%
4.Silicone thinner XG-128AH adding ratio:0-20%
5.Heating Temp and time: Flash temp :100℃~120℃

Printing process:

1.Crossing linker for under coating printing for 1-2 layers:
Crossing linker XG-360Z-3X 50G
Extra fast dry Catalyst XG-866B-2+ 3G 6%
Flash by 100℃-120℃
To easy to fill the knitting holes to use 80( 38T) mesh


2.Round Silicone for HD print 6-10+ layers by 32T MESH :
Round silicone XG-866A-2Y 50G
Fast dry catalyst XG-866B-2 1G 2%
Silicone thinner XG-128AH 5-10G 10-20%
Flash by temp of 100℃-120℃
if need more high density then print more layers
To easy to get the knitting fabric smooth to use 80( 38T) mesh

3.Round Silicone for HD print 4- 6 layers by 48T MESH :
Round silicone XG-866A-2Y 50G
Fast dry catalyst XG-866B-2 1G 2%
Silicone thinner XG-128AH 5-10G 10-20%
Flash by temp of 100℃-120℃

4.Color effect silicone printing for 4-6 layers :
Round silicone XG-866A-2Y 50G
White color pigment XG-102 10G For white and fluorescent color 20%,other color 10%
Fast dry catalyst XG-866B-2 1G 2%
Silicone thinner XG-128AH 5-10G 10-20%
Flash by temp of 100℃-120℃
Color layer to use 48T or 63T for CMY color


5.Glossy silicone ink or matte silicone ink for top coating:
A, Glossy top coating for 2 layers:
Glossy silicone ink XG-399-3 50G
Fast dry catalyst XG-866B-2 1G 2%
Silicone thinner XG-128AH Silicone thinner is not necessary.
Flash by temp of 100-110℃

B, Matte top coating for 1 time:
Matte silicone XG-866M 50G
Fast dry catalyst XG-866B-2 1G 2%
Silicone thinner XG-128AH Silicone thinner is not necessary
Flash by temp of 120℃ 6-10 seconds.


After printing finish, to heat by 120℃- 140℃ for about 2 -3 minutes.

Silicone Ink for knitting Shoe upper printing
Silicone Ink for knitting Shoe upper printing
Silicone Ink for knitting Shoe upper printing

Share this post

0 0 votes
Article Rating
Subscribe
Notify of
guest
0 评论
Inline Feedbacks
View all comments

Hello~

0
Would love your thoughts, please comment.x
()
x