How to print screen printing silicone ink Chameleon Silicone HD glossy effect?

By silicone HD Glossy Silicone Effect 0 Comments

Firstly, to print under printing,

Second, to print white silicone,

Third, to print colorful silicone,

Fourth, to print chameleon powder with printing silicone ink,

In the end, to print glossy silicone ink.

For the printing process kindly follow the below tips.

Screen printing silicone ink preparation and screen printing silicone mixing ratio:

1.Mesh & Squeegee for Screen Printing Silicone Ink:

120(48T) Mesh number;

65-75 degree Squeegee.

2.Pigments added ratio for Screen Printing Silicone Ink:

For white and fluorescent colors 20%, other colors 10%,

chameleon powder mixing ratio10%.

3.Screen Printing Silicone Ink Catalyst mixing ratio:

2% slow dry XG-866B-1 and fast dry XG-866B-2 can mix together for use.

4. Screen Printing Silicone Ink thinner XG-128A adding ratio: 0-20%

Notes: Silicone thinner is not necessary for hand printing

5.Screen Printing Silicone Ink Heating Temp and time: Flash cure temp for Screen Printing Silicone Ink :100℃- 120℃ for 6-10 seconds, Drying temp :120℃ for about 2 minutes.

Printing process:

1st.HD silicone for under printing 1 layer:

HD silicone XG-866A 100G

Silicone catalyst XG-866B-2 2G 2%

Heating temp 120 Degree

2nd.White silicone print 2 layers:

HD silicone XG-866A 100G

White pigment XG-102 20G 20%

Silicone catalyst XG-866B-2 2G 2%

Heating temp 120 Degree

3rd.Color silicone print 2 layers:

HD silicone XG-866A 100G

White pigment XG-102 20G 20%

Silicone catalyst XG-866B-2 2G 2%

Heating temp 120 Degree

4th.Screen printing silicone chameleon powder print 2 layers:

Screen printing silicone XG-866A-2Y 100G

Chameleon powder 10G 10%

Silicone thinner XG-128AH 10-20G 10-20%

Silicone catalyst XG-866B-2 2G 2%

Heating temp 120 Degree

5th.Glossy silicone for top coating 1-2 layers:

Glossy silicone ink XG-399-3 100G

Fast dry catalyst XG-866B-2 2G 2%

Heating temp 100-120 Degree Have to get silicone bubbles out first, try to use code wind to support and it will be better to use low temp by longer heating time. To avoid bubbles problem.