How to print PU Water Based Nylon Ink on knitting shoe upper?

First ,Preparation:

1. Mesh&Squeegee: 120-150(48T-60T) Mesh number; 65-70 degree Squeegee.
2. Fixer mixing ratio:2%
3. Flash and curing temp: 80℃- 100℃ or by room temp

Second , printing process:

1 HD PU water based nylon Ink print for 6-12 layers :

HD PU water based nylon Ink     XGS-806          300 G

Fixer                            XGS-339           6G  2%   

Flash by 80℃- 100℃ or by room temp

2 Red color smooth PU water based nylon Ink print for 3-4 layers

Red PU water based nylon Ink      XGS-302        200 G

Fixer                            XGS-339           6G  2%   

Flash by 80℃- 100℃ or by room temp

3 Matte or Glossy PU water based nylon Ink for top print for 1-2 layers

A.Matte PU water based nylon Ink for top print for 1 layer

Matte PU water based nylon Ink      XGS-110M        200 G

Fixer                               XGS-339           4G  2%   

Flash by 80℃- 100℃ or by room temp

B.Glossy PU water based nylon Ink  for top print for 1 layer

Glossy PU water based nylon Ink      XGS-110        200 G

Fixer                                XGS-339           4G  2%   

Flash by room temp

For Glossy PU water based nylon Ink, it is better to cure at room temp can get a better glossy effect.