How to print HD Silicone Transfers by hot melt powder?

Silicone ink PET films:

Two types : one is glossy coating film which will be glossy after heating press on fabric ,another one is matte finish effect after heating press on fabric.

Mesh number： 120-200 , Mesh(screen film )thickness 0.1-0.2MM,it is depends on printing Artworks. Squeegee：65-80 degree .

Printing tips

• 1. Silicone ink color layer printing for 4-6 layers :

Silicone ink     XG-866A-3Y       100G

Pigments or special powders       10-20G  (10-20% white&fluorescent 15-20% other colors 10%)

Silicone catalyst     XG-866B-2           2G   2%

Silicone thinner        XG-128AH          10-20G    10-20%

Flash by 100 to120 degree.

• 2. Silicone and transfer agent wet on wet printing for two layers as mid layer:

Transfer silicone            XG-866A-3Y       50G

Silicone thinner             XG-128AH          10-20G    10-20%

Silicone catalyst            XG-866B-2          1.5G    3%

  Silicone transfer agent      XG-MZ              2.5G   5%

 Printing wet on wet for 2 times， keep 100% wet can not heat:

• 3. Spill hot melt powder on wet silicone transfer agent layer immediately.

• 4. After finish, to put into the oven to bake by 100-120 degree for about 10 minutes,if bake higher temp then less time,once hot melt powder 100% melt then it is ok.
• 5. Heat press by 160-170 degree for 10-16 seconds with pressure of 4KG.

TIPS: Kindly doing test before the bulk goods printing every time.