How to Print HD Glossy Silicone on Fabric?

XG silicone 3D glossy effect

How to Print HD Glossy Silicone on Fabric?

silicone 3D glossy printing on Fabric

Silicone High-density printing :

Preparation:

Mesh&Squeegee: 120(48T) Mesh number; 65-75 degree Squeegee.
Pigments added ratio: For white and fluorescent color 20%, other colors 10%
Catalyst mixing ratio: 2% slow dry XG-866B-1 and fast dry XG-866B-2 can mix together for use.
Thinner XG-128A adding ratio:0-20%    thinner is not necessary for hand printing
Heating Temp and time: Flash cure temp:100℃- 120℃ for 6-10 seconds, Drying temp:120℃- 140℃ for about 2 -5 minutes.

Silicone ink printing tips:

1 HD silicone XG-866A/866AH for undercoating  and high-density printing for 2-8 times 
HD silicone     XG-866A/866AH        60G
Fast dry catalyst   XG-866B-2           1.2G  2%   If machine printing to use a slow dry catalyst.
Thinner     XG-128AH  thinner is not necessary for hand printing,5-20% is enough for machine printing. Cure by the temp of 120℃ 6-10 seconds.
If fabric with hairy or want to get a more smooth effect kindly assist by heat press machine or iron after first time printing. After printing keeps wet to heat press by temp 150-170 degrees for 10-20 seconds.
2 Color effect silicone printing for 3-4 times : 
HD silicone       XG-866A/866AH        50G
White color pigment    XG-102          10G For white and fluorescent color 20%, other colors 10%
Fast dry catalyst        XG-866B-2       1G  2%  If machine printing to use a slow dry catalyst.
Thinner     XG-128AH  thinner is not necessary for hand printing,5-10% is enough for machine printing. Cure by the temp of 120℃ 6-10 seconds.
3 Glossy silicone ink or matte silicone ink for top coating:
 Glossy top coating for 1-2 times:
Glossy silicone ink   XG-399-3  50G
Fast dry catalyst  XG-866B-2      1G  2%  It will be better to use slow dry catalyst XG-866B-1 and fast dry half and half. If for machine printing to use a slow dry catalyst.
Thinner     XG-128AH  thinner is not necessary for hand printing,5-10% is enough for machine printing. Cure by the temp of 100-110℃ 10-25 seconds.

XG Silicone 3D Glossy Effect
xg hd silicone glossy silicone effect
XG glossy silicone ink effect
XG silicone 3D high density glossy silicone printing effect
XG silicone chameleon silicone effect
XG silicone HD glossy effect
XG Silicone HD glossy effect

[video_embed url=”http://www.youtube.com/watch?v=eFqPh0v-96Q”] [space_box id=”” height=”10″]

Share this post

0 0 votes
Article Rating
Subscribe
Notify of
guest
1 评论
Oldest
Newest Most Voted
Inline Feedbacks
View all comments
Mohd Rashid Ali
2 years ago

nice i like very beatyful and most guaility ful print


Hello~

1
0
Would love your thoughts, please comment.x
()
x