HD Glossy Silicone Transfers Sticker Logo Making

HD Glossy Silicone Transfers Sticker Logo Making

Tags: HD glossy silicone transfers,  HD transfer stickers Silicone logo, Transfer logo,transfer silicone, silicone transfer stickers making

Silicone ink PET films:

To choose matte coating PET films

Mesh number 120-200 , Mesh(screen film )thickness 0.1-0.2MM,it is depends on printing Artworks.

Squeegee:65-80 degree .

Printing tips:

1 Hot melt glue XG-360R-3 print for 4-6 times

When printing glue to use cyclohexanone to liquid the glue,mixing ratio 10%.This type of glue easy to be thick and mesh printing.

  Flash by room temp or by 100-120 degree.

2 Mid layer crossing linker printing for 2 times

Crossing linker     XG-360Z-3     50G

 Crossing linker agent  XG-360Z-3B 2.5G  5%

Flash by 100 to120 degree.

3 Silicone ink clear layer printing 4 -8 layers

  Silicone ink     XG-866A-2Y       100G

  Catalyst     XG-866B-2           2-5 G  2-5%

Thinner         XG-128AH          10-20G    10-20%

Flash by 120 to140 degree.

if needed for high density stickers,if need more high density then print more times clear printing.

4 Silicone ink color layer printing for 4-6 layers

Silicone ink     XG-866A-2Y       100G

Pigments or special powders       10-20G  (10-20% white&fluorescent 15-20% other colors 10%)

  Catalyst     XG-866B-2           2G   2%

Thinner         XG-128AH          10-20G    10-20%

Flash by 120 to140 degree.

5 Glossy silicone for top printing or brush effect printing Glossy silicone for top coating printing for two layers:

Glossy silicone ink XG-399-3 100G

Catalyst XG-866B-2 2G 2%

Thinner XG-128AH   No need Thinner is not necessary for glossy silicone printing.

To print very soft to get in drop though the mesh and pull up the screen to get round and glossy effect.

The angel between squeegee and screen is 60-70 degree not as normal printing 90 degree.

Flash by 100 to120 degree.

Tips for round glossy silicone top coating printing :

  1. The angel between squeegee & table 60-70 degree,if manual printing about 45-65 degree
  2. Keep distance between printing squeegee & screen
  3. Less pressure print very soft and slowly try to get more ink pass through the mesh to get round glossy effect.
  4. After finish, put into the oven to bake by 100 degree for30- 40 minutes.

 Heat press the stick on the heat transfer press machine by the temp of 160-170 degree for 10-16 seconds with pressure of 4KG.

HD glossy silicone transfers HD transfer stickers
XG silicone for  3D glossy  silicone transfer l
XG silicone for 3D glossy silicone transfer logos

Cell:+86 15899645234    wechat&whatsapp the same number

Share this post

5 1 vote
Article Rating
Subscribe
Notify of
guest
0 评论
Inline Feedbacks
View all comments

Hello~

0
Would love your thoughts, please comment.x
()
x