Conductive Silicone for Conductive Gloves Printing

Gloves Printing Conductive Ink

Conductive Silicone Printing Tips

Preparation:

Mesh&Squeegee: 100-120(40-48T) Mesh number; 65-75 degree Squeegee.

Catalyst mixing ratio:2%   Thinner XG-128A adding ratio:0-20%

Heating Temp and time: Flash cure temp: 100℃- 120℃ for 6-10 seconds, Drying temp: 120℃- 130℃ for about 2 -3 minutes.

Round Silicone for under printing for 2 times:

Round silicone       XG-866A-2Y    50G

Fast dry catalyst        XG-866B-2       1G    2%

Silicone thinner      XG-128AH      10G  10%  

Cure by temp of 120℃ 6-10 seconds.

If fabric with hairy or want to get a more smooth effect kindly assist by heat press machine or iron after first time printing. After printing keep wet to heat press by temp 150-170 degrees for 10-20 seconds.

Conductive silicone printing for 3 times : 

Conductive silicone        XG-866D        50G

Fast dry catalyst           XG-866B-2       1G  2%  

Silicone thinner       XG-128AH      5G  10% Cure by temp of 120℃ 6-10 seconds.

After printing finish, to heat by 120℃- 140℃ for about 2 -5 minutes.