Silicone Brush Effect

How to print tooth brush silicone effect on elastic? taps

Printing tips for silicone tooth brush effect printing Preparation: Mesh&Squeegee: HD and glossy screen Mesh number 120-150 (48-59T),CMYK Mesh number300(120T)   ; Squeegee 65-75 degree Squeegee sharp and flat. Pigments added ratio:For white and fluorescent color 20%,other color 10% Catalyst mixing ratio:10% Silicone thinner XG-128AH adding ratio:10-30% ,brush printing need more silicone thinner. Heating Temp and time: Flash cure temp :80℃-100℃ for 6-10 seconds ,after finish printing to...

Silicone Brush Effect Printing

T-shirt/fabric/silicone ink brush printing and silicone high density brush dots printing Preparation: Mesh&Squeegee: 120(48T) Mesh number ;65-75 degree Squeegee.: Pigments added ratio:For white and fluorescent color 20%,other color 10%Catalyst mixing ratio:2% slow dry XG-866B-1 and fast dry XG-866B-2 can mix together for using.Thinner XG-128A adding ratio:10-30%    thinner is very necessary for brush printing Heating Temp and time: Flash cure temp :100℃- 120℃ for...

Hello~