Puff Silicone Effect

How to print XG silicone ink for pulling printing suede puff silicone printing and chameleon powder silicone effect?

How to screen print Silicone Special Effect with XG Silicone Ink? Printing tips for silicone pulling printing chameleon silicone and suede puff silicone effect Preparation: Mesh&Squeegee: 100-120(40-48T) Mesh number ;65-75 degree Squeegee. : Pigments added ratio:For white and fluorescent color 20%,other color 10% Catalyst mixing ratio:2%-4% slow dry XG-866B-1 and fast dry XG-866B-2.Fast dry catalyst for hand printing,slow dry or slow and fast dry mix together for...

Screen Printing Silicone Puff Silicone Ink Foaming Silicone Ink

Preparation: Mesh&Squeegee: 120(48T) Mesh number; 65-75 degree Squeegee.Pigments added ratio: For white and fluorescent color 20%,other color 10%Catalyst mixing ratio: 2% slow dry XG-866B-1 and fast dry XG-866B-2 can mix together for using.Thinner XG-128A adding ratio: 0-20%    thinner is not necessary for hand printingFlash cure temp: 100℃- 120℃ for 6-10 seconds Silicone ink printing tips: HD silicone XG-866A/866AH for under coating printing for 2-3 times : HD silicone/soft silicone    XG-866AH/XG-866AR        60G Fast dry catalyst            XG-866B-2        1.2G...

Best Selling Machine Printing Silicone – XG Silicone

We XG Silicone (Xinguang Silicone) Jiangxi Xinguang Co., Ltd. & Huizhou Yirun sililcione Co., Ltd.are specializing in producing textile printing silicone ink that both for machine and hand printing with long printing time and easy drying,less waste and easy print,no need retarder and others agent to expend print printing time for machine printing. XG Silicone HD Silicone (high density printing...

Puff Foaming Silicone Printing

soft puff textile Machine printing silicone Preparation: Mesh&Squeegee: 120(48T) Mesh number ;65-75 degree Squeegee. : Pigments added ratio:For white and fluorescent color 20%,other color 10% Catalyst mixing ratio:2% slow dry XG-866B-1 and fast dry XG-866B-2 can mix together for using. Thinner XG-128A adding ratio:0-10%    thinner is not necessary Heating Temp and time: Flash cure temp :100℃- 120℃ for 6-10 seconds ,After finish to heat by 160-170 degree for 2-3...

Hello~