HD Glossy Silicone Effect

How to print CMYK silicone & glossy silicone effect on elastic taps?

Printing tips for silicone CMYK glossy silicone effect printing Preparation: Mesh&Squeegee: HD and glossy screen Mesh number 120-150 (48-59T), CMYK Mesh number300(120T) ;Squeegee 65-75 degrees Squeegee sharp and flat.Pigments added ratio: For white and fluorescent colors 20%, other colors 10%Catalyst mixing ratio:10%Silicone thinner XG-128AH adding ratio:10-20% :20% Heating Temp and time: Flash cure temp:100℃- 120℃ for 6-10 seconds, after finish printing to...

How to print Elastic Webbing by golden glossy silicone effect?

Printing Tips HD Golden Glossy Silicone Ink for Ribbons printing Preparation: Mesh&Squeegee: 120(48T) Mesh number ;Squeegee 65-75 degrees Squeegee sharp and flat.Pigments added ratio: For white and fluorescent colors 20%, other colors 10%Catalyst mixing ratio:10%Silicone thinner XG-128AH adding ratio:10-20% :20%Heating Temp and time: Flash cure temp:100℃- 120℃ for 6-10 seconds, after finish printing to dry by temp:120℃- 140℃ for about...

How to Screen Print HD glossy golden silicone Effect?

Tips for golden silicone ink printing Preparation: Mesh&Squeegee: 120(48T) Mesh number; 65-75 degree Squeegee.Pigments added ratio: For white and fluorescent colors 20%, other colors 10%, glitter powders 10%.Catalyst mixing ratio: 2% slow dry XG-866B-1 and fast dry XG-866B-2 can mix together for use.Silicone thinner XG-128A adding ratio: 0-20% Silicone thinner is not necessary for hand printingHeating Temp and time: Flash cure temp:100℃- 120℃ for 6-10 seconds, Drying temp: 120℃- 140℃ for 2-3...

How to print supper smooth glossy silicone effect?

Key points for HD Glossy Silicone Ink Screen Printing 1st To make a thick screen  2nd For the hairy fabric, to heat press by heat press machine or iron after first-time silicone printing for smooth effect. Silicone ink is sticky when lifting up the screen and heated all fabric hairy will stand up, if heat presses then all fabric hairy will lie flat...

How to print screen printing silicone ink Chameleon Silicone HD glossy effect?

Firstly, to print under printing, Second, to print white silicone, Third, to print colorful silicone, Fourth, to print chameleon powder with printing silicone ink, In the end, to print glossy silicone ink. For the printing process kindly follow the below tips. Screen printing silicone ink preparation and screen printing silicone mixing ratio: 1.Mesh & Squeegee for Screen Printing Silicone Ink: 120(48T) Mesh number; 65-75 degree Squeegee. 2.Pigments added ratio...

Best Selling Machine Printing Silicone – XG Silicone

We XG Silicone (Xinguang Silicone) Jiangxi Xinguang Co., Ltd. & Huizhou Yirun sililcione Co., Ltd.are specializing in producing textile printing silicone ink that both for machine and hand printing with long printing time and easy drying,less waste and easy print,no need retarder and others agent to expend print printing time for machine printing. XG Silicone HD Silicone (high density printing...

How to Print XG HD glossy silicone for horse riding pants printing?

Preparation: Mesh&Squeegee: 120(48T) Mesh number ;65-75 degree Squeegee.: Pigments added ratio:For white and fluorescent color 20%,other color 10%Catalyst mixing ratio:2% slow dry XG-866B-1 and fast dry XG-866B-2 can mix together for using.Silicone thinner XG-128A adding ratio:0-20%    Silicone thinner is not necessary for hand printingHeating Temp and time: cure temp :100℃- 120℃ for 6-10 seconds ,Drying temp :120℃- 140℃ for about 2 -3 minutes. Silicone ink printing tips: 1. Under coating...

TDS of Chameleon & Glitter Powder High-Density Glossy Silicone

Preparation: Mesh&Squeegee: 100-120(40-48T) Mesh number; 65-75 degree Squeegee.: Pigments added ratio: For white and fluorescent color 20%, other colors 10%Chameleon, Thermochromic Glitter powders, mixing ratio 3-10%Catalyst mixing ratio:2% slow dry XG-866B-1 and fast dry XG-866B-2 can mix together for use.Thinner XG-128A adding ratio:0-20% Heating Temp and time: Flash cure temp: 100℃- 120℃ for 6-10 seconds, Drying temp: 120℃- 130℃ for about 2 -3 minutes. Silicone ink printing tips: HD silicone...

How to Print HD Glossy Silicone on Fabric?

silicone 3D glossy printing on Fabric Silicone High-density printing : Preparation: Mesh&Squeegee: 120(48T) Mesh number; 65-75 degree Squeegee.Pigments added ratio: For white and fluorescent color 20%, other colors 10%Catalyst mixing ratio: 2% slow dry XG-866B-1 and fast dry XG-866B-2 can mix together for use.Thinner XG-128A adding ratio:0-20%    thinner is not necessary for hand printingHeating Temp and time: Flash cure temp:100℃- 120℃ for 6-10 seconds, Drying temp:120℃- 140℃ for about 2 -5 minutes. Silicone ink...

HD Glossy Silicone and HD Matte Silicone Printing

silicone 3D glossy printing and HD matte silicone printing Silicone High density printing : Preparation: Mesh&Squeegee: 120(48T) Mesh number ;65-75 degree Squeegee.: Pigments added ratio:For white and fluorescent color 20%,other color 10%Catalyst mixing ratio:2% slow dry XG-866B-1 and fast dry XG-866B-2 can mix together for using.Thinner XG-128A adding ratio:0-20%    thinner is not necessary for hand printingHeating Temp and time: Flash cure temp :100℃- 120℃ for 6-10 seconds ,Drying...

Hello~