Direct Printing Silicone

TDS of XG transfer silicone 20AH for HD label

Preparations : Silicone ink PET films: Matte film Screen Mesh number: 120-200 (48-80T) , Mesh(screen film )thickness 0.1-0.2MM,it is depends on printing Artworks. Squeegee:65-80 degree . Printing tips: 1 Transfer silicone color layer printing for 4-8 +layers  : Transfer HD silicone     XG-20AH        100G Pigments Red           XG-302            10G    10% Silicone catalyst         XG-TMB-1          10G     10% Silicone thinner         XG-128AH          10-20G    10-20% Flash by 80 to100 degree 2 Transfer crossing linker 2 layers :    Silicone crossing linker        XG-360Z-3X       50G Crossing linker agent         XG-866B-2+       3-4G    6-8% Flash 100-120 degree. 3 Hot melt...

How to print XG Silicone Ink On Mesh shoe upper?

Mesh sneaker upper printing silicone ink. Key points for mesh shoe upper printing Screen Printing HD glossy Silicone Ink for big holes Mesh upper Printing Process: Preparation: 1.Mesh&Squeegee: 120(48T) Mesh number ;65-75 degree Squeegee.2.: Pigments added ratio: For white and fluorescent color 20%,other color 10%3.Catalyst mixing ratio:10% slow dry XG-MB-1 Extra slow dry catalyst XG-TMB-14.Silicone thinner XG-128AH adding ratio:0-20%5.Heating Temp :60℃~100℃ Printing process: 1.PU based...

How to print silicone for under wear bar seamless Bonding?

Silicone printing tips for underwear bonding printing Preparation: 1.40-60(16T-24T) 65-75 degree Squeegee. 2.Catalyst mixing ratio:2-3% 3.Silicone thinner XG-128A adding ratio:20-40%   Heating Temp and Time: 110℃ for 15 minutes. 1.Screen printing silicone ink for underwear bonding printing: 2.Screen printing underwear bonding silicone print 1 layer: Underwear bonding silicone     XG-866NY      100G Silicone thinner                 XG-128AH       20-40G   20-40% Fast dry catalyst                XG-866B-2        2-3G      2-3% 3.To stick a piece of underwear fabric on printed fabric,...

TDS of XG Silicone for Tatami Fabric Patches Screen Printing

Preparation: Mesh&Squeegee: 120(48T) Mesh number ;65-75 degree Squeegee. : Pigments added ratio:For white and fluorescent color 20%,other color 10% Catalyst mixing ratio:2%  Thinner XG-128A adding ratio:0-20%     6.Heating Temp and time: Flash cure temp :100℃- 120℃ for 6-10 seconds ,after printing crossing linker XG- 360Z-3X have to to bake 10-20 minutes ,due to Tatami fabric can not stand high temp ,better to us low temp of 60℃-70℃ . Printing tips: 1 Printing ink for under...

How to print XG silicone ink for pulling printing suede puff silicone printing and chameleon powder silicone effect?

How to screen print Silicone Special Effect with XG Silicone Ink? Printing tips for silicone pulling printing chameleon silicone and suede puff silicone effect Preparation: Mesh&Squeegee: 100-120(40-48T) Mesh number ;65-75 degree Squeegee. : Pigments added ratio:For white and fluorescent color 20%,other color 10% Catalyst mixing ratio:2%-4% slow dry XG-866B-1 and fast dry XG-866B-2.Fast dry catalyst for hand printing,slow dry or slow and fast dry mix together for...

How to print glitter glossy silicone ink on cotton T-shirt?

reparation: Mesh&Squeegee: 100-120(40-48T) Mesh number ;65-75 degree Squeegee. : Pigments added ratio:For white and fluorescent color 20%,other color 10% Catalyst mixing ratio:2% slow dry XG-866B-1 and fast dry XG-866B-2 can mix together for using.If machine printing to chose slow dry catalyst or slow and fast dry half and half. Silicone thinner XG-128A adding ratio:0-20%     Heating Temp and time: Flash cure temp :100℃- 120℃ for 6-10 seconds ,Drying temp :120℃- 140℃ for about 2 –3 minutes. Printing...

How to print silicone for under wear bonding?

Silicone printing tips for underwear bonding printing Preparation: 1.60-80(24-32T) 65-75 degree Squeegee. 2.Catalyst mixing ratio:3% 3.Silicone thinner XG-128A adding ratio:20-30%   Heating Temp and time: Flash cure temp: 120℃ for 6-10 seconds ,Drying temp: 100℃for about 10 minutes. Screen printing silicone ink for underwear bonding printing: 1.Underwear bonding silicone ink print 5 layers: Underwear bonding silicone    XG-866NY-2       100G Silicone thinner                 XG-128AH         20-30G  20-30% Fast dry catalyst                XG-866B-2          3G   3% Cure by temp of...

How to print tooth brush silicone effect on elastic? taps

Printing tips for silicone tooth brush effect printing Preparation: Mesh&Squeegee: HD and glossy screen Mesh number 120-150 (48-59T),CMYK Mesh number300(120T)   ; Squeegee 65-75 degree Squeegee sharp and flat. Pigments added ratio:For white and fluorescent color 20%,other color 10% Catalyst mixing ratio:10% Silicone thinner XG-128AH adding ratio:10-30% ,brush printing need more silicone thinner. Heating Temp and time: Flash cure temp :80℃-100℃ for 6-10 seconds ,after finish printing to...

How to print CMYK silicone & glossy silicone effect on elastic taps?

Printing tips for silicone CMYK glossy silicone effect printing Preparation: Mesh&Squeegee: HD and glossy screen Mesh number 120-150 (48-59T), CMYK Mesh number300(120T) ;Squeegee 65-75 degrees Squeegee sharp and flat.Pigments added ratio: For white and fluorescent colors 20%, other colors 10%Catalyst mixing ratio:10%Silicone thinner XG-128AH adding ratio:10-20% :20% Heating Temp and time: Flash cure temp:100℃- 120℃ for 6-10 seconds, after finish printing to...

How to print Elastic Webbing by golden glossy silicone effect?

Printing Tips HD Golden Glossy Silicone Ink for Ribbons printing Preparation: Mesh&Squeegee: 120(48T) Mesh number ;Squeegee 65-75 degrees Squeegee sharp and flat.Pigments added ratio: For white and fluorescent colors 20%, other colors 10%Catalyst mixing ratio:10%Silicone thinner XG-128AH adding ratio:10-20% :20%Heating Temp and time: Flash cure temp:100℃- 120℃ for 6-10 seconds, after finish printing to dry by temp:120℃- 140℃ for about...

Hello~