Embossing Moulding Silicone

How to make an embossed effect on T-shirt by liquid silicone ink two component printing silicone ink?

XG silicone 2 parts liquid silicone ink for 3D embossed Logo making fabric silicone ink embossing process 3D embossing label making by silicone ink process: EMBOSSING SILICONE INK XG-360KY & XG-360BH printing and emboss Mesh number 80-120 (32-48T)  Fix the molds on the machine Adjust equipment pressure 4.Set temp temp and time : Upper mold 180 degree Bottom mold 120-170 degree Embossing time 8-15 seconds. 5.Silicone ink mixing ratio Embossing silicone ink  XG-360KY-55...

How to 3D Emboss Silicone Screen Printing for Sportswear fabric?

Mesh number 80-120 (32-48T) Embossing printing silicone ink and catalyst Mixing Ratio: Embossing silicone ink  XG-360KY-55:  50G Embossing silicone catalyst XG-360BH:   5G   (mixing ratio 10%) Silicone thinner  XG-128AH: not necessary Print mixing silicone ink on the backside of the fabric Machine temp set temp : Upper mold 180 degree Bottom mold 120-150 degree Can stick a thin fabric on the printing fabric backside   (depends on  design ) Heating time 8-15 seconds   (depends...

Embossing Silicone

T-shirt/fabric/silicone ink Embossing process, silicone ink for silicone embossing machine, 3D Embossing silicone ink for fabric embossing machine process Code number: XG-360KY-55 &catalyst XG-360BH XG-360KY-65&catalyst XG-360BH1 Mesh number 80-120 (32-48T) 1st Embossing silicone ink mixing: Embossing silicone ink  XG-360KY-55/XG-360KY-65 :  50G Embossing silicone catalyst XG-360BH/XG-360BH1:   5G   (mixing ratio 10%) Silicone thinner : not necessary 2nd Printing mixing silicone...

Mould Pressing Silicone Transfer Stickers Making

XG-360W & catalyst XG-360WB Silicone transfer stickers making by mould and hot melt paper,moulding silicone transfer stickers,transfer logos by mould press making process: 1st : Filling bellow mixing moulding silicone ink together into the mould Moulding silicone XG-360W 60G Silicone catalyst XG-360WB 6G 10%     Pigments 1-4% 2nd: Put the hot melt paper on the silicone ink filled mould 3rd. Machine heat press ,this including vacuum , venting...

Moulding Silicone Ink

XG-360W & catalyst XG-360WB 1st Mixing moulding silicone ink Moulding silicone ink XG-360W           50G Moulding silicone catalyst XG-360WB        5G   (mixing ratio 10%) Silicone thinner   : 0-10% Silicone pigments  2-4% 2nd Vacuum by vacuum machine Mixing together well and vacuum by vacuum machine.  Fill the liquid moulding silicone on the mold move to vacuum by vacuum machine 3rd Fill the vacuumed silicone ink on the...

Hello~