Conductive Silicone Tips

Conductive Silicone for Conductive Gloves Printing

Gloves Printing Conductive Ink Conductive Silicone Printing Tips Preparation: Mesh&Squeegee: 100-120(40-48T) Mesh number; 65-75 degree Squeegee. Catalyst mixing ratio:2%   Thinner XG-128A adding ratio:0-20% Heating Temp and time: Flash cure temp: 100℃- 120℃ for 6-10 seconds, Drying temp: 120℃- 130℃ for about 2 -3 minutes. Round Silicone for under printing for 2 times: Round silicone       XG-866A-2Y    50G Fast dry catalyst        XG-866B-2       1G    2% Silicone thinner      XG-128AH      10G  10%   Cure by temp of 120℃ 6-10 seconds. If fabric with hairy or want...

ArabicBengaliChinese (Simplified)DutchEnglishFrenchGermanIndonesianItalianMalayPortugueseRussianSpanishThaiTurkishUrduVietnamese