Author - silicone

How to make Multi-color 3D transfer silicone label stickers?

2 color 3D transfer silicone stickers making tips 1st  : Dispensing Multi-color molding silicone A) Color effect molding silicone ink mixing : Moulding silicone   XG-360W   60G Silicone catalyst   XG-360WB    6G 10%    Silicone pigments             1.8-3G 3-5% Silicone thinner    XG-128AH-1  30G  50% B) Vacuum mixing color molding silicone ink C) Dispensing Multi-color molding silicone D) Curing by 150-220 degree for 1.5-3 minutes in oven,have to do the test...

How to print XG silicone ink for pulling printing suede puff silicone printing and chameleon powder silicone effect?

How to screen print Silicone Special Effect with XG Silicone Ink? Printing tips for silicone pulling printing chameleon silicone and suede puff silicone effect Preparation: Mesh&Squeegee: 100-120(40-48T) Mesh number ;65-75 degree Squeegee. : Pigments added ratio:For white and fluorescent color 20%,other color 10% Catalyst mixing ratio:2%-4% slow dry XG-866B-1 and fast dry XG-866B-2.Fast dry catalyst for hand printing,slow dry or slow and fast dry mix together for...

How to print glitter glossy silicone ink on cotton T-shirt?

reparation: Mesh&Squeegee: 100-120(40-48T) Mesh number ;65-75 degree Squeegee. : Pigments added ratio:For white and fluorescent color 20%,other color 10% Catalyst mixing ratio:2% slow dry XG-866B-1 and fast dry XG-866B-2 can mix together for using.If machine printing to chose slow dry catalyst or slow and fast dry half and half. Silicone thinner XG-128A adding ratio:0-20%     Heating Temp and time: Flash cure temp :100℃- 120℃ for 6-10 seconds ,Drying temp :120℃- 140℃ for about 2 –3 minutes. Printing...

How to make an embossed effect on T-shirt by liquid silicone ink two component printing silicone ink?

XG silicone 2 parts liquid silicone ink for 3D embossed Logo making fabric silicone ink embossing process 3D embossing label making by silicone ink process: EMBOSSING SILICONE INK XG-360KY & XG-360BH printing and emboss Mesh number 80-120 (32-48T)  Fix the molds on the machine Adjust equipment pressure 4.Set temp temp and time : Upper mold 180 degree Bottom mold 120-170 degree Embossing time 8-15 seconds. 5.Silicone ink mixing ratio Embossing silicone ink  XG-360KY-55...

How to print silicone for under wear bonding?

Silicone printing tips for underwear bonding printing Preparation: 1.60-80(24-32T) 65-75 degree Squeegee. 2.Catalyst mixing ratio:3% 3.Silicone thinner XG-128A adding ratio:20-30%   Heating Temp and time: Flash cure temp: 120℃ for 6-10 seconds ,Drying temp: 100℃for about 10 minutes. Screen printing silicone ink for underwear bonding printing: 1.Underwear bonding silicone ink print 5 layers: Underwear bonding silicone    XG-866NY-2       100G Silicone thinner                 XG-128AH         20-30G  20-30% Fast dry catalyst                XG-866B-2          3G   3% Cure by temp of...

How to print silicone on elastic tapes by auto-table screen printing machine?

High density screen printing silicone for elastic ribbon 3D printing silicone anti-slip silicone printing for tapes Tips of elastic silicone XG-130D-3+ printing on Auto-table screen printing machine Preparation: Mesh&Squeegee: HD and glossy screen Mesh number 120-150 (48-59T), CMYK Mesh number300(120T). Squeegee 65-75 degree Squeegee sharp and flat. Pigments added ratio:For white and fluorescent color 20%, other color 10% Catalyst mixing ratio:10% Silicone thinner XG-128AH adding ratio:10-20% :20% Heating Temp...

TDS of transfer silicone XG-360W-2 printing

Silicone ink PET films: Two types: one is glossy coating film which will be glossy after heating press on fabric, another one is matte finish effect after heating press on fabric. Mesh number: 120-200, Mesh (screen film) thickness 0.1-0.2MM, it depends on printing Artworks. Squeegee:65-80 degree. Printing tips: For transfer silicone printing we have two types of transfer silicone, one is XG-360W-2, catalyst 360B mixing ratio 10%...

How to print tooth brush silicone effect on elastic? taps

Printing tips for silicone tooth brush effect printing Preparation: Mesh&Squeegee: HD and glossy screen Mesh number 120-150 (48-59T),CMYK Mesh number300(120T)   ; Squeegee 65-75 degree Squeegee sharp and flat. Pigments added ratio:For white and fluorescent color 20%,other color 10% Catalyst mixing ratio:10% Silicone thinner XG-128AH adding ratio:10-30% ,brush printing need more silicone thinner. Heating Temp and time: Flash cure temp :80℃-100℃ for 6-10 seconds ,after finish printing to...

How to print CMYK silicone & glossy silicone effect on elastic taps?

Printing tips for silicone CMYK glossy silicone effect printing Preparation: Mesh&Squeegee: HD and glossy screen Mesh number 120-150 (48-59T), CMYK Mesh number300(120T) ;Squeegee 65-75 degrees Squeegee sharp and flat.Pigments added ratio: For white and fluorescent colors 20%, other colors 10%Catalyst mixing ratio:10%Silicone thinner XG-128AH adding ratio:10-20% :20% Heating Temp and time: Flash cure temp:100℃- 120℃ for 6-10 seconds, after finish printing to...

How to print Elastic Webbing by golden glossy silicone effect?

Printing Tips HD Golden Glossy Silicone Ink for Ribbons printing Preparation: Mesh&Squeegee: 120(48T) Mesh number ;Squeegee 65-75 degrees Squeegee sharp and flat.Pigments added ratio: For white and fluorescent colors 20%, other colors 10%Catalyst mixing ratio:10%Silicone thinner XG-128AH adding ratio:10-20% :20%Heating Temp and time: Flash cure temp:100℃- 120℃ for 6-10 seconds, after finish printing to dry by temp:120℃- 140℃ for about...

Hello~